P/N: A10004900 (PDF version)
Pentek waste Transfer Lids helps move liquids and semi-liquid materials continuously through your waste collection system without taxing its operating performance envelope. In particular, VAC-PAC® systems are designed to operate in continuous, maintenance free service for extended periods of time; up to one (1) year between service intervals. This high system availability and low operational costs of the VAC-PAC® system is well-known throughout the global hazardous waste management industry. The Transfer Lid accessory provides a convenient, intermediate collection point to support:
Rapid collection and disposal of liquid wastes while maintaining the safety margins you’ve come to expect of the VAC-PAC® system, and
Controlled collection of semi-liquid waste and sludge that might otherwise cause unnecessary clogs or prematurely foul the VAC-PAC’s 2-stage, high performance HEPA filtration system.
Simple Concept and Reliable Operation
- Utilizes a self-powered vortex arrangement to separate heavy materials from the vacuum (air) stream
- Contains no moving parts
- Compatible with all standard 208-litre waste drums
- Lid is held down and sealed by strong, natural vacuum forces
- Contains locking safety latches to avoid accidental opening when vacuum is off
- Heavy-wall stainless steel construction increases operating life and eases decontamination
- Lightweight for easy handling by a single operator
- Battery-powered level detection warns of a full waste drum
Hose Connection
- 2-inch (50mm) diameter inlet and outlet tubes
- 3-inch (75mm) diameter inlet and outlet tubes
- Connection options are compatible with Pentek hose cuffs
Electrical
- Uses 2 x standard 9 Volt batteries
- IP-54 sealing of electrical components
- Built-in test of High Level indicating lamp
- 2 week battery life under normal use
- Battery indicator circuit warns when batteries should be replaced
Physical and Environmental
- Dry weight: 24 lbs (11 kg)
- Size: 24-inch (600mm) diameter to fit standard 208-litre waste drums
- Operating temperature: 35°F to +118°F (2°C to +50°C)
- Operating vacuum: +0.0 bar pressure to -0.30 bar vacuum conditions
- Not qualified to handle explosive materials
Limited Warranty
The Wet Separator is warranted to be free of defects in material or workmanship for a period of 1 year from the date of delivery. Pentek makes no other warranties or representation, expressed or implied, with respect to functionability or fitness for use of a particular purpose. In no event shall Pentek be liable for any incidental or consequential damages arising out of the application or
use of any products provided.