Power Tools

We sell and rent a comprehensive line of pneumatic hand-held tools, for contractors and commercial markets, ideal for removal of:

  • Lead Paint and Epoxy Coatings
  • Nuclear Radioactivity
  • Concrete (Typically Scabbled in 1/16in to 1/4″ Layers)
  • PCBs and Chemical Spills
  • Asbestos Gaskets
  • Rust and Corrosion

All of our tools are vacuum-shrouded for dustless operation. In most applications, no respirators or containment structures are required! (See Compliance section for more information)

The operation generates no additional chemical waste since it is 100% mechanical, greatly reducing disposal costs.

The standard 1-1/2″ hose can be connected to our VAC-PAC® 55-gallon drum system for a complete integrated solution, our Compact Vac backpack vacuum for increased portability, or your own vacuum system.

Corner-Cutter® – Tight Spaces

Needle gun designed with interchangeable vacuum shrouds to scarify hard-to-access areas such as corners, door frames, rivets, and piping.

Multiple high-speed, specially hardened reciprocating impact needles conform to the most complex surface contours.

Scabbles 30-60 ft/hr or 20-30 sqft/hr (nominal). Requires 5 SCFM of compressed air at 90 psi (see spec sheet).

Roto-Peen – Walls & I-Beams

Rotary scaling tool designed for rapid and dustless coatings removal from flat surfaces. The cutting media can be interchanged for different surfaces:

  • 3M Tungsten Carbide Flaps for paint removal from steel, concrete, brick, and wood
  • Star Cutter for aggressive concrete removal
  • CAW (Cushioned Abrasive Wheel) for aluminum, copper, composite and other soft surfaces (info)

Available in standard or right-angle configuration, based on job requirements.

Scales 40-50 sqft/hr (nominal). Requires 30 SCFM of compressed air at 90 psi (see spec sheet).


Wheeled floor scabbling tool with push handle can get into tight floor spaces near corners, floor penetrations, equipment pedestals, steps, and under protruding equipment.

Three high-speed, reciprocating tungsten carbide tipped pistons pulverize coatings and substrates.

Scabbles 20-30 sqft/hr (nominal) at 1/16in depth. Requires 60 SCFM of compressed air at 80 psi (see spec sheet).

SQUIRREL®-II – Expansion Joints & Cracks

Heavy-duty wheeled floor scabbling tool will remove contamination that has migrated or settled into cracks, fractures and expansion joints in concrete floors and slabs.

A single, high-speed, tungsten carbide bit provides highly aggressive scabbling. The 7/8-inch diameter bit is available in 2-inch and 5-inch lengths.

Scabbles 50-60 ft/hr (nominal) at 1/4in depth. Requires 38 SCFM at 90 psi (see spec sheet).

SQUIRREL®-I – Contamination Hot-Spots

Heavy-duty scabbling tool for floors and walls designed for spot remediation in deeply settled “hot” areas where scarification and collection to greater depths is required for remediation.

A single, high-speed, tungsten carbide bit provides highly aggressive surface scabbling.

Scabbles 25-30 sqft/hr (nominal) at 1/4in depth. Requires 25 SCFM of compressed air at 90 psi (see spec sheet).